Forum Navigation
Post History: ScanLabs
This is a technical choice I did , having all the figures at a glance was not convincing .
what i …In: Monitor page
2 months ago
Tooo many bugs all together 😉
apart the navigation bar that I’ve not added by tech choice , the …In: Monitor page
2 months ago
2 months ago
Ciao grikom, let me study it . I was already implementing the feature in a different way , more comp …In: MQTT only publishes health topic
5 months ago
Ciao Kapilag123, thanks for commenting . Please note the project “Smart BMS data Extractor” project …In: Release 3.5.2 DALY and JK
5 months ago
Cool …. but not as much … you have found a bug.
Indeed the webpage should not say "CONNECT …In: MQTT only publishes health topic
5 months ago
Hey grikom,
on the sw I'm not publishing on the topic "bms_global/health" , what you …In: MQTT only publishes health topic
5 months ago
Ciao grikom,
for what I can see the MQTT broker credentials are ok : dongle reports “CONNECTED”
…In: MQTT only publishes health topic
5 months ago
Hello guys,
finally today the first working firmware library to decode JK-PBx BMS via CAN port/ …In: JK-PBx via CAN – first working software
5 months ago
Release 3.5.2 is ready.
Enable on Settings->MISC the Auto FW Upgrade feature and reboot the do …In: Release 3.5.2 DALY and JK
6 months ago
Hi,
UART is meant to be point 2 point. Splitting could not work and potentially can distroy the HW. …In: Jk-B connecting to Vevor hybrid ivnverter
6 months ago
Hi Per,
only the Settings page does not show or it is shown partially ?
When you roll-back rem …In: New Bug Found? Basic Rules
7 months ago
Thanks to everyone who pointed out the anomalies on 3.5.2_RC1.
Here is version 3.5.2_RC2 for your t …In: 3.5.2_RC2 Beta Tester Needed !
7 months ago
Hello,
I’m looking for beta tester for rel 3.5.2_RC1 .
What are the changes … well, a completely …In: 3.5.1_RC1 Beta Tester Needed !
7 months ago
Hello gents,
this forum is meant to share bugs or odd things you have found.
When sharing alwa …In: New Bug Found? Basic Rules
7 months ago
No no Per .
go to Settings -> Log&File , select the file where you see the problem . Downl …In: Release 3.5.1 DALY and JK
7 months ago
Per , download the .csv file from Settings->log &file . 3075 is a special value I use for so …In: Release 3.5.1 DALY and JK
7 months ago
3.5.1 available for download, go to forum "Firmware & Software" section .
ScanLabsIn: Release 3.5.1 Coming
7 months ago
Official 3.5.1 package released valid for JK-Bx , JK-PBx and DALY + Clones.
Contains ScanLabs Sm …In: Release 3.5.1 DALY and JK
7 months ago
Release 3.5.1 ready via Auto FW upgrade.
If you have Auto FW upgrade enables in "Settings-> …In: Release 3.5.1 Coming
7 months ago
Hello, some bugs found from community on rel 3.5.0 -> 3.5.1 coming soon fixing ( Target Sunday …In: Release 3.5.1 Coming
7 months ago
For some reasons highchart is not loaded.
Please ONLY for the sake of test, upgrade your FW with …In: Release 3.5.0 DALY and JK
7 months ago
Hey Per,
share some picture, links or any tech info about the display you bought.
I …In: Remote MQTT/MODBUS Color Display
7 months ago
Thanks Per for sharing.
I checked and infact the routines are failing downloading the highchart l …In: Release 3.5.0 DALY and JK
7 months ago