Monitor page
Quote from mikes on August 13, 2026, 4:59 pmOn the Monitor page (x.x.x.x/graph), the times are incorrect for the local time zone; Vbat, SOC, and Delta are not shown (using 001 – JK BMS RS485 Modbus 1.0), and there is no tab bar at the top to allow navigating away. Vbat, SOC, and Delta are shown on the Status page
FW: 3.6.2_REPC
On the Monitor page (x.x.x.x/graph), the times are incorrect for the local time zone; Vbat, SOC, and Delta are not shown (using 001 – JK BMS RS485 Modbus 1.0), and there is no tab bar at the top to allow navigating away. Vbat, SOC, and Delta are shown on the Status page
FW: 3.6.2_REPC
Quote from ScanLabs on August 13, 2026, 5:13 pmTooo many bugs all together 😉
apart the navigation bar that I’ve not added by tech choice , the rest you are reporting I need to investigate . Are you willing to open the dongle to me via port forward or via AnyDesk ? If yes , please contact me via discord to agree on the way to debug .
tnxScanLabs
Tooo many bugs all together 😉
apart the navigation bar that I’ve not added by tech choice , the rest you are reporting I need to investigate . Are you willing to open the dongle to me via port forward or via AnyDesk ? If yes , please contact me via discord to agree on the way to debug .
tnx
ScanLabs
Quote from mikes on August 13, 2026, 6:34 pmI only had it connected to the BMS for a few hours. It’s now disconnected. The BMS is in a camper (caravan), and I don’t have the wiring in place yet to have it permanently connected.
In the short time I’ve been working with it, I can see where it would be useful to me. So I just sent you a license request.
Once it’s licensed, I’ll be able to provide the .csv (?) file which is missing Vbat, SOC, and Delta, if that helps. The date is way off – Jan 1, and I think the times are 10 hours off. I’m in GMT-4, and the time and date on the Status and Battery pages are correct.
If looking at it while it’s offline from the BMS would be useful, we can do a Discord screen share – but I’ll have to figure that out first. 🙂 Here’s what the page looks like…
I only had it connected to the BMS for a few hours. It’s now disconnected. The BMS is in a camper (caravan), and I don’t have the wiring in place yet to have it permanently connected.
In the short time I’ve been working with it, I can see where it would be useful to me. So I just sent you a license request.
Once it’s licensed, I’ll be able to provide the .csv (?) file which is missing Vbat, SOC, and Delta, if that helps. The date is way off – Jan 1, and I think the times are 10 hours off. I’m in GMT-4, and the time and date on the Status and Battery pages are correct.
If looking at it while it’s offline from the BMS would be useful, we can do a Discord screen share – but I’ll have to figure that out first. 🙂 Here’s what the page looks like…
Uploaded files:
- You need to login to have access to uploads.
Quote from mikes on August 14, 2026, 11:32 amI figured out the missing Vbat, SOC, and Delta. You have to click on the labels below the chart to enable (or disable) them. For some reason, the default is that only Power is enabled. Date and time are still incorrect.
I figured out the missing Vbat, SOC, and Delta. You have to click on the labels below the chart to enable (or disable) them. For some reason, the default is that only Power is enabled. Date and time are still incorrect.
Quote from ScanLabs on August 15, 2026, 9:46 amThis is a technical choice I did , having all the figures at a glance was not convincing .
what indeed  is still missing to save the selection made .
ScanLabs
This is a technical choice I did , having all the figures at a glance was not convincing .
what indeed  is still missing to save the selection made .
ScanLabs
Quote from mikes on September 7, 2026, 1:36 pm3.6.3 seems to have fixed the time stamping problem on the Monitor page.
3.6.3 seems to have fixed the time stamping problem on the Monitor page.