Hello FOLK some new projects on which I’m working soon available

1- PCB WITH ALL THE ELECTRONIC COMPONENTS
STATUS: WORK IN PROGRESS
OK- too many requests – I decided to build a PCB with all the componets needed.
For DALY or JK ( Px and PBx )
WORK IN PROGRESS.

2- NEW PROJECT: WIFI MODBUS extension for Battery charger
STATUS: WORK IN PROGRESS
Is a way to modify this kind of battery charger to be WiFi connected, expose a MODBUS Server interface to manage in real time how much power to inject into the batteries. Polling time as fast as you want – Tests Now with 1s adjusting time on a 500W and 2KW Battery Charger.
Useful if you want to store extra energy from your Photovoltaic cell into the Battery rather then selling to utilities.

3- OLD STYLE TUBE DISPLAY FOR BMS – WORK IN PROGRESS

PROJECTS COMPLETED AND AVAILABLE FOR CLONING/DOWNLOADING & TEST

1- TASMOTA 420×320 3.5” Color display
>> FULLY SUPPORTED FROM SW 3.4.0
2- TASMOTA MULTI BMS VIEWER COLOR display
>> FULLY SUPPORTED FROM SW 2.3.4
up to 15 different BMS can be shown by only one MQTT color display
I publish super raw/preliminary video here

3- TASMOTA DISPLAY POINT to POINT ( NO – Access point OR Internet needed )
FULLY SUPPORTED FROM SW REL 2.3.4
– basically the connection between ScanLabs dongle BMS data extractor and Color Display is WIFi Point to point – It works without Internet and allows to monitor the BMS within the WiFi range of the two devices.
The dongle become the Access Point, the display(s) as WiFi client.
It works also if an Access Point connected or not connected to internet is available .
in this last case, both the dongle and the display(s) are set as WiFi client.

4- DONGLE FOR JK and DALY with a TINY DISPLAY showing basic info in rolling mode
FULLY RLEASED from SW rel 3.3.0
– Current dongle IP/PORT
– SOC – V and I
– Alarms
– Time