3.6.0/1/2 Breaking compatibility with TASMOTA conf file
Quote from ScanLabs on August 9, 2026, 6:57 amHello folk,
I’ve just figure out that the latest 3.6.0/1/2 have broken the compatibility with Tasmota Remote Color diplay about the AUTO-CONFIG mode.
In fact, SmartBMS data Extractor, before latest releases, was exporting a file named “config.txt” that when copy & paste into the TASMOTA Remote Color Display file system, were used to automatically configure the display with WiFi and MQTT credentials.
On latest 3.6.0/1/2 I changed the structure of config.txt, now named config3.txt – definetively not compatible with tasmota.
On next 3.6.3 I will fix exporting a dedicated config file for Tasmota – “Tasmota.conf” , this will clean any problems.
Meanwhile, if you have any problem, link with me.ScanLabs
Hello folk,
I’ve just figure out that the latest 3.6.0/1/2 have broken the compatibility with Tasmota Remote Color diplay about the AUTO-CONFIG mode.
In fact, SmartBMS data Extractor, before latest releases, was exporting a file named “config.txt” that when copy & paste into the TASMOTA Remote Color Display file system, were used to automatically configure the display with WiFi and MQTT credentials.
On latest 3.6.0/1/2 I changed the structure of config.txt, now named config3.txt – definetively not compatible with tasmota.
On next 3.6.3 I will fix exporting a dedicated config file for Tasmota – “Tasmota.conf” , this will clean any problems.
Meanwhile, if you have any problem, link with me.
ScanLabs
Quote from ScanLabs on September 13, 2026, 6:28 amTo all remote COLOR DISPLAY users.
For whom is reading for the first time -> SEE HERE THE DISPLAY IN ACTION ON YOUTUBETo export the full configuration file for the Tasmota display – go to :
Settings -> Display
select TASTOMA
At the bottom push on “GENERATE TASMOTA CONFIG”A file named config.txt is generated – follow the MANUAL versioning >= 3.6.3 section TASMOTA/CONFIGUATION OF THE DISPLAY for MQTT USERS
for further info .Enjoy
ScanLabs
NOTE: CONSIDER to Donate a coffe to keep me going eahead 😉
To all remote COLOR DISPLAY users.
For whom is reading for the first time -> SEE HERE THE DISPLAY IN ACTION ON YOUTUBE
To export the full configuration file for the Tasmota display – go to :
Settings -> Display
select TASTOMA
At the bottom push on “GENERATE TASMOTA CONFIG”
A file named config.txt is generated – follow the MANUAL versioning >= 3.6.3 section TASMOTA/CONFIGUATION OF THE DISPLAY for MQTT USERS
for further info .
Enjoy
ScanLabs
NOTE: CONSIDER to Donate a coffe to keep me going eahead 😉
Uploaded files:
- You need to login to have access to uploads.